A Machine Learning Approach for Driver Identification Based on CAN-BUS Sensor Data

Driver identification is a momentous field of modern decorated vehicles in the controller area network (CAN-BUS) perspective. Many conventional systems are used to identify the driver. One step ahead, most of the researchers use sensor data of CAN-BUS but there are some difficulties because of the variation of the protocol of different models of vehicle. Our aim is to identify the driver through supervised learning algorithms based on driving behavior analysis. To determine the driver, a driver verification technique is proposed that evaluate driving pattern using the measurement of CAN sensor data. In this paper on-board diagnostic (OBD-II) is used to capture the data from the CAN-BUS sensor and the sensors are listed under SAE J1979 statement. According to the service of OBD-II, drive identification is possible. However, we have gained two types of accuracy on a complete data set with 10 drivers and a partial data set with two drivers. The accuracy is good with less number of drivers compared to the higher number of drivers. We have achieved statistically significant results in terms of accuracy in contrast to the baseline algorith

Prediction of addiction to drugs and alcohol using machine learning: A case study on Bangladeshi population

Nowadays addiction to drugs and alcohol has become a significant threat to the youth of the society as Bangladesh’s population. So, being a conscientious member of society, we must go ahead to prevent these young minds from life-threatening addiction. In this paper, we approach a machinelearning-based way to forecast the risk of becoming addicted to drugs using machine-learning algorithms. First, we find some significant factors for addiction by talking to doctors, drug-addicted people, and read relevant articles and write-ups. Then we collect data from both addicted and nonaddicted people. After preprocessing the data set, we apply nine conspicuous machine learning algorithms, namely k-nearest neighbors, logistic regression, SVM, naïve bayes, classification, and regression trees, random forest, multilayer perception, adaptive boosting, and gradient boosting machine on our processed data set and measure the performances of each of these classifiers in terms of some prominent performance metrics. Logistic regression is found outperforming all other classifiers in terms of all metrics used by attaining an accuracy approaching 97.91%. On the contrary, CART shows poor results of an accuracy approaching 59.37% after applying principal component analysis

Spatial, temporal, and demographic patterns in prevalence of chewing tobacco use in 204 countries and territories, 1990-2019 : a systematic analysis from the Global Burden of Disease Study 2019

Interpretation Chewing tobacco remains a substantial public health problem in several regions of the world, and predominantly in south Asia. We found little change in the prevalence of chewing tobacco use between 1990 and 2019, and that control efforts have had much larger effects on the prevalence of smoking tobacco use than on chewing tobacco use in some countries. Mitigating the health effects of chewing tobacco requires stronger regulations and policies that specifically target use of chewing tobacco, especially in countries with high prevalence. Findings In 2019, 273 center dot 9 million (95% uncertainty interval 258 center dot 5 to 290 center dot 9) people aged 15 years and older used chewing tobacco, and the global age-standardised prevalence of chewing tobacco use was 4 center dot 72% (4 center dot 46 to 5 center dot 01). 228 center dot 2 million (213 center dot 6 to 244 center dot 7; 83 center dot 29% [82 center dot 15 to 84 center dot 42]) chewing tobacco users lived in the south Asia region. Prevalence among young people aged 15-19 years was over 10% in seven locations in 2019. Although global agestandardised prevalence of smoking tobacco use decreased significantly between 1990 and 2019 (annualised rate of change: -1 center dot 21% [-1 center dot 26 to -1 center dot 16]), similar progress was not observed for chewing tobacco (0 center dot 46% [0 center dot 13 to 0 center dot 79]). Among the 12 highest prevalence countries (Bangladesh, Bhutan, Cambodia, India, Madagascar, Marshall Islands, Myanmar, Nepal, Pakistan, Palau, Sri Lanka, and Yemen), only Yemen had a significant decrease in the prevalence of chewing tobacco use, which was among males between 1990 and 2019 (-0 center dot 94% [-1 center dot 72 to -0 center dot 14]), compared with nine of 12 countries that had significant decreases in the prevalence of smoking tobacco. Among females, none of these 12 countries had significant decreases in prevalence of chewing tobacco use, whereas seven of 12 countries had a significant decrease in the prevalence of tobacco smoking use for the period. Summary Background Chewing tobacco and other types of smokeless tobacco use have had less attention from the global health community than smoked tobacco use. However, the practice is popular in many parts of the world and has been linked to several adverse health outcomes. Understanding trends in prevalence with age, over time, and by location and sex is important for policy setting and in relation to monitoring and assessing commitment to the WHO Framework Convention on Tobacco Control. Methods We estimated prevalence of chewing tobacco use as part of the Global Burden of Diseases, Injuries, and Risk Factors Study 2019 using a modelling strategy that used information on multiple types of smokeless tobacco products. We generated a time series of prevalence of chewing tobacco use among individuals aged 15 years and older from 1990 to 2019 in 204 countries and territories, including age-sex specific estimates. We also compared these trends to those of smoked tobacco over the same time period. Findings In 2019, 273 & middot;9 million (95% uncertainty interval 258 & middot;5 to 290 & middot;9) people aged 15 years and older used chewing tobacco, and the global age-standardised prevalence of chewing tobacco use was 4 & middot;72% (4 & middot;46 to 5 & middot;01). 228 & middot;2 million (213 & middot;6 to 244 & middot;7; 83 & middot;29% [82 & middot;15 to 84 & middot;42]) chewing tobacco users lived in the south Asia region. Prevalence among young people aged 15-19 years was over 10% in seven locations in 2019. Although global age standardised prevalence of smoking tobacco use decreased significantly between 1990 and 2019 (annualised rate of change: -1 & middot;21% [-1 & middot;26 to -1 & middot;16]), similar progress was not observed for chewing tobacco (0 & middot;46% [0 & middot;13 to 0 & middot;79]). Among the 12 highest prevalence countries (Bangladesh, Bhutan, Cambodia, India, Madagascar, Marshall Islands, Myanmar, Nepal, Pakistan, Palau, Sri Lanka, and Yemen), only Yemen had a significant decrease in the prevalence of chewing tobacco use, which was among males between 1990 and 2019 (-0 & middot;94% [-1 & middot;72 to -0 & middot;14]), compared with nine of 12 countries that had significant decreases in the prevalence of smoking tobacco. Among females, none of these 12 countries had significant decreases in prevalence of chewing tobacco use, whereas seven of 12 countries had a significant decrease in the prevalence of tobacco smoking use for the period. Interpretation Chewing tobacco remains a substantial public health problem in several regions of the world, and predominantly in south Asia. We found little change in the prevalence of chewing tobacco use between 1990 and 2019, and that control efforts have had much larger effects on the prevalence of smoking tobacco use than on chewing tobacco use in some countries. Mitigating the health effects of chewing tobacco requires stronger regulations and policies that specifically target use of chewing tobacco, especially in countries with high prevalence. Copyright (c) 2021 The Author(s). Published by Elsevier Ltd. This is an Open Access article under the CC BY 4.0 license.Peer reviewe

Mortality from gastrointestinal congenital anomalies at 264 hospitals in 74 low-income, middle-income, and high-income countries: a multicentre, international, prospective cohort study

Summary Background Congenital anomalies are the fifth leading cause of mortality in children younger than 5 years globally. Many gastrointestinal congenital anomalies are fatal without timely access to neonatal surgical care, but few studies have been done on these conditions in low-income and middle-income countries (LMICs). We compared outcomes of the seven most common gastrointestinal congenital anomalies in low-income, middle-income, and high-income countries globally, and identified factors associated with mortality. Methods We did a multicentre, international prospective cohort study of patients younger than 16 years, presenting to hospital for the first time with oesophageal atresia, congenital diaphragmatic hernia, intestinal atresia, gastroschisis, exomphalos, anorectal malformation, and Hirschsprung’s disease. Recruitment was of consecutive patients for a minimum of 1 month between October, 2018, and April, 2019. We collected data on patient demographics, clinical status, interventions, and outcomes using the REDCap platform. Patients were followed up for 30 days after primary intervention, or 30 days after admission if they did not receive an intervention. The primary outcome was all-cause, in-hospital mortality for all conditions combined and each condition individually, stratified by country income status. We did a complete case analysis. Findings We included 3849 patients with 3975 study conditions (560 with oesophageal atresia, 448 with congenital diaphragmatic hernia, 681 with intestinal atresia, 453 with gastroschisis, 325 with exomphalos, 991 with anorectal malformation, and 517 with Hirschsprung’s disease) from 264 hospitals (89 in high-income countries, 166 in middleincome countries, and nine in low-income countries) in 74 countries. Of the 3849 patients, 2231 (58·0%) were male. Median gestational age at birth was 38 weeks (IQR 36–39) and median bodyweight at presentation was 2·8 kg (2·3–3·3). Mortality among all patients was 37 (39·8%) of 93 in low-income countries, 583 (20·4%) of 2860 in middle-income countries, and 50 (5·6%) of 896 in high-income countries (p<0·0001 between all country income groups). Gastroschisis had the greatest difference in mortality between country income strata (nine [90·0%] of ten in lowincome countries, 97 [31·9%] of 304 in middle-income countries, and two [1·4%] of 139 in high-income countries; p≤0·0001 between all country income groups). Factors significantly associated with higher mortality for all patients combined included country income status (low-income vs high-income countries, risk ratio 2·78 [95% CI 1·88–4·11], p<0·0001; middle-income vs high-income countries, 2·11 [1·59–2·79], p<0·0001), sepsis at presentation (1·20 [1·04–1·40], p=0·016), higher American Society of Anesthesiologists (ASA) score at primary intervention (ASA 4–5 vs ASA 1–2, 1·82 [1·40–2·35], p<0·0001; ASA 3 vs ASA 1–2, 1·58, [1·30–1·92], p<0·0001]), surgical safety checklist not used (1·39 [1·02–1·90], p=0·035), and ventilation or parenteral nutrition unavailable when needed (ventilation 1·96, [1·41–2·71], p=0·0001; parenteral nutrition 1·35, [1·05–1·74], p=0·018). Administration of parenteral nutrition (0·61, [0·47–0·79], p=0·0002) and use of a peripherally inserted central catheter (0·65 [0·50–0·86], p=0·0024) or percutaneous central line (0·69 [0·48–1·00], p=0·049) were associated with lower mortality. Interpretation Unacceptable differences in mortality exist for gastrointestinal congenital anomalies between lowincome, middle-income, and high-income countries. Improving access to quality neonatal surgical care in LMICs will be vital to achieve Sustainable Development Goal 3.2 of ending preventable deaths in neonates and children younger than 5 years by 2030

Convolutional Neural Network Modeling for Eye Disease Recognition

The eye is an important sensing organ of the human body, as it reacts to light and allows vision of humans. Many Bangladeshi people become nearsighted when it comes to the awareness of vision loss due to eye disease. Many Bangladeshis people are more concerned about losing their money than getting nearsighted or blind, due to a combination of poverty and illiteracy. With this view, this paper proposes an osteopathic expert system that can deal with an image of the eye and recognize the disease. Here, we have focused on the three most common eye diseases in Bangladesh, namely cataract, chalazion, and squint. We have modeled six convolutional neural networks (CNN’s), namely VGG16, VGG19, MobileNet, Xception, InceptionV3, and DenseNet121 to recognize the diseases. We have reached the best configuration of each of these CNN models after adequate investigation. After performing satisfactory experimentation, we have found that the MobileNet model gives the best performance based on accuracy, precision, recall, and F1-score. At last, we have compared our findings with the recently reported relevant works to show their efficacy

Low-cost relay selection in multihop cooperative networks

A best relay selection algorithm for a cooperative multi-hop cross-layer single-input single-output (SISO) amplify-and-forward (AF) wireless relay network is analyzed in this work, with the application where exact channel state information (CSI) is known. We present algorithmic strategies to simplify a multi-hop parallel SISO relay network into a series multi-hop network by finding the best path having the maximum received signal-to-noise ratio (SNR). The best relay selection by using dynamic programming search entails high computations and large memory requirements, as well as involves the full CSI information, making this approach impractical for large-scale networks. The goal of the proposed low-cost near-optimal routing strategy in this work is to provide close to optimal performance with much less complexity compared to traditional routing. Next, we also propose a low-cost power allocation to further improve system performance over traditional power allocation found in the literature. Computer simulations show excellent performance improvement of our proposed methods in terms of bit error rate (BER) as well as outage probability over the traditional relaying and power allocation algorithms